GemDisk industrial SSD factory floor in Pingshan, Shenzhen SMT, ageing, testing and packing under one roof in Pingshan, Shenzhen.
Industrial SSDs from GemDisk before real-machine testing M.2 PCIe NVMe, M.2 SATA (NGFF), mSATA (MO-300) and 2.5" SATA.
GemDisk · Industrial SSD manufacturer

Industrial SSD

Five form factors, and one of them fits your board: M.2 PCIe NVMe, M.2 SATA (NGFF), mSATA (MO-300) and 2.5" SATA, from 32 GB to 4 TB. Designed and manufactured in our own plant in Pingshan, Shenzhen.

See the five series  ·  Send your requirements

2015Founded
10,000m²Factory area
1,000,000SSD produced monthly
0.03%Defect rate
01 Where they go

Six places these drives end up

Control cabinets, recording hosts, payment terminals, network gear, edge servers, and the machines that are simply too good to replace.

Industrial control Surveillance & recording Networking equipment Retail & kiosk Edge computing & AI Legacy replacement

See the applications

02 The range

Which one fits your board?

Same capacity does not mean the same slot. Pick the form factor your board takes, and everything else follows from there.

M.2 PCIe NVMe 3.0 M.2 PCIe NVMe 3.0 22 × 80 mm · 2,000–3,500 MB/s The workhorse. Gen3 speeds for industrial boards and edge boxes — the part most builds ship with. See the series M.2 PCIe NVMe 4.0 M.2 PCIe NVMe 4.0 22 × 80 mm · 5,000–7,000 MB/s The performance ceiling. Gen4 throughput for AI inference and throughput-bound edge servers. See the series M.2 SATA (NGFF) M.2 SATA (NGFF) 22 × 42 / 60 / 80 mm · ~550 MB/s Fits the slot you already have. B&M key, so a legacy M.2 SATA-only board still sees it. See the series mSATA (MO-300) mSATA (MO-300) 50.8 × 29.85 mm · ~550 MB/s Still in production for POS terminals and networking gear — with a wide-temperature option. See the series 2.5 2.5″ SATA 100 × 69.85 mm · ~550 MB/s The drop-in hard drive swap. Same footprint, same connectors, nothing else to buy. See the series
03 Drawn to scale

How much room each one takes

All four footprints at one common scale, so you can measure before you commit. A 2.5" drive is more than four times the footprint of an M.2 2242.

M.2 2280 22 × 80 mm
M.2 2242 22 × 42 mm
mSATA (MO-300) 50.8 × 29.85 mm
2.5″ SATA 100 × 69.85 mm
0 20 40 60 80 100
04 Where they come from

Made, aged and tested in one plant

30,000 units a day off the SMT lines, every one of them aged, RDT-tested and real-machine tested before it is packed.

SMT assembly at the GemDisk factory Environmental ageing at the GemDisk factory Real-machine testing at the GemDisk factory

Inside the plant

05 Your name on it

Put your brand on the drive

Your logo on the box, the casing and the label — or tell us what the drive has to cost and we will match the controller and the NAND to that number.

Yours

What you set

  • Packaging — your logo and artwork on the box.
  • Casing — shell design to your requirements.
  • Label — brand, model and capacity your way.
Our side

How we meet it

  • Target price — tell us what the drive has to cost, and we match the controller and flash to it.
  • Specification — or give us the performance you need and we quote the build.

OEM / ODM

Tell us what the machine takes

Send the board or machine model, the capacity and the quantity. We reply within 24 hours — and we will say plainly if we are not the right supplier for the part.